-
-
电子绝缘材料进口贸易港资企业
国外绝缘材料代理商
电子绝缘材料进口贸易港资企业
电子绝缘材料进口贸易港资企业
国外绝缘材料代理商
概述
优异的性能，如强度、电绝缘、耐热、抗水解、耐化学性、尺寸稳定性、气体阻隔性能和低低聚物提取
TEONEX。在高温高湿条件下表现出卓越的耐用性
这种特殊的薄膜有可能取代其他具有更高性价比的工程薄膜
TEONEX还具有与PET薄膜相同的处理性能
●高Tg和低吸湿性使电绝缘在高温高湿条件下具有高可靠性
●由于具有良好的抗水解性，Teonex®在高温高湿条件下广泛使用
●TEONEX®降低FPC基板在高频GHz频带的传输损耗
●TEONEX®可以采用与PET薄膜相同的方式进行涂覆和层压
●卓越的强度和杨氏模量使操作和转换变得容易
●卓越的防潮和隔氧性能
●对有机溶剂、化学品和油类具有优异的耐受性
| Item | Unit | Q5100 [Q51] (standard) | Q5300 [Q53] (low shrinkage) | Q8300 [Q83] (Super low shrinkage) | Method * Apply mutatis mutandis to | |
|---|---|---|---|---|---|---|
| Thickness | μm | 50 | 50 | 50 | JIS C2151* | |
| Tensile strength | MD | MPa | 279 | 233 | 233 | JIS C2318* |
| TD | 285 | 276 | 276 | |||
| Elongation | MD | % | 121 | 161 | 161 | JIS C2318* |
| TD | 110 | 123 | 123 | |||
| Heat Shirinkage (30min at 150℃) | MD | % | 0.4 | 0.2 | 0.1 | JIS C2318* |
| TD | 0.3 | 0.2 | 0.0 | |||
| Heat Shirinkage (10min at 200℃) | MD | % | 0.7 | - | 0.4 | JIS C2318* |
| TD | 0.8 | - | 0.1 | |||
| Heat Shirinkage (10min at 230℃) | MD | % | - | 1.2 | - | JIS C2318* |
| TD | - | 0.4 | - | |||
Above data is typical value, not guaranteed.
应用
●电机、干式变压器
●FPC，扁平电缆
●燃料电池组件
●工艺胶带、胶带
| Characteristics | Product type | Application |
|---|---|---|
| Standard | Q5100 [Q51] | Transformer, Motor, Process tape, Adhesion tape, Speaker diagram |
| Low shrinkage | Q5300 [Q53] | FPC, FFC, Process tape, FC component |
| Super Low shrinkage (Annealed) | Q8100 [Q81] | |
| Q8300 [Q83] |
※Contact us regarding available thickness (Thickness range of Q5100: 12 to 250 micron)
UL号码：E206562 绝缘级数：F级（155℃）
概述
优异的性能，如强度、电绝缘、耐热、抗水解、耐化学性、尺寸稳定性、气体阻隔性能和低低聚物提取
TEONEX。在高温高湿条件下表现出卓越的耐用性
这种特殊的薄膜有可能取代其他具有更高性价比的工程薄膜
TEONEX还具有与PET薄膜相同的处理性能
●高Tg和低吸湿性使电绝缘在高温高湿条件下具有高可靠性
●由于具有良好的抗水解性，Teonex®在高温高湿条件下广泛使用
●TEONEX®降低FPC基板在高频GHz频带的传输损耗
●TEONEX®可以采用与PET薄膜相同的方式进行涂覆和层压
●卓越的强度和杨氏模量使操作和转换变得容易
●卓越的防潮和隔氧性能
●对有机溶剂、化学品和油类具有优异的耐受性
| Item | Unit | Q5100 [Q51] (standard) | Q5300 [Q53] (low shrinkage) | Q8300 [Q83] (Super low shrinkage) | Method * Apply mutatis mutandis to | |
|---|---|---|---|---|---|---|
| Thickness | μm | 50 | 50 | 50 | JIS C2151* | |
| Tensile strength | MD | MPa | 279 | 233 | 233 | JIS C2318* |
| TD | 285 | 276 | 276 | |||
| Elongation | MD | % | 121 | 161 | 161 | JIS C2318* |
| TD | 110 | 123 | 123 | |||
| Heat Shirinkage (30min at 150℃) | MD | % | 0.4 | 0.2 | 0.1 | JIS C2318* |
| TD | 0.3 | 0.2 | 0.0 | |||
| Heat Shirinkage (10min at 200℃) | MD | % | 0.7 | - | 0.4 | JIS C2318* |
| TD | 0.8 | - | 0.1 | |||
| Heat Shirinkage (10min at 230℃) | MD | % | - | 1.2 | - | JIS C2318* |
| TD | - | 0.4 | - | |||
Above data is typical value, not guaranteed.
应用
●电机、干式变压器
●FPC，扁平电缆
●燃料电池组件
●工艺胶带、胶带
| Characteristics | Product type | Application |
|---|---|---|
| Standard | Q5100 [Q51] | Transformer, Motor, Process tape, Adhesion tape, Speaker diagram |
| Low shrinkage | Q5300 [Q53] | FPC, FFC, Process tape, FC component |
| Super Low shrinkage (Annealed) | Q8100 [Q81] | |
| Q8300 [Q83] |
※Contact us regarding available thickness (Thickness range of Q5100: 12 to 250 micron)
UL号码：E206562 绝缘级数：F级（155℃）
